Guide · Transactions

What buyers, lenders and independent engineers need from a pre-close condition survey

A data room shows what an operating plant produced. A condition survey shows the state it's in today. Here is where a field survey fits in technical due diligence, and what makes one useful by the time you close.

Published November 16, 2026 · Tessera Asset Intelligence

Where it fits in technical due diligence

Lenders and investors in operating solar and storage plants frequently require an independent engineer's technical due diligence before they commit capital, whether for an acquisition, a construction or term loan, or a refinancing. For an operating plant that work typically runs in stages:

  1. Design and yield review. Design flaws, code issues that could void warranties, and whether the yield forecast is realistic.
  2. Commissioning and maintenance records. Gaps that could let a manufacturer refuse a warranty claim, and benchmarks for expected output.
  3. Production history. Weather-corrected performance, availability and signs of accelerated degradation.
  4. Physical site inspection. Wear, installations that don't match the as-built drawings, shading, soiling and other site conditions.

A condition survey is evidence for that last step. It doesn't replace the independent engineer's opinion; it gives the engineer something measured to form one on.

Why production data isn't enough

Defects in modules, wiring, connectors and inverters often don't show up in performance until years after commissioning. When they do, they cut cash flow and push maintenance costs above what the model assumed. Weather-corrected analysis can tell you which assets are underperforming; it can't tell you which strings, modules or connections are responsible.

Site visits have a sampling problem as well. There is no settled rule for how many assets in a portfolio to inspect, and guidance warns against samples weighted toward the best-installed sites. A full-plant aerial survey removes the sampling question for the modules: every row is imaged under the same conditions.

What a useful survey covers

ItemWhy it matters to the deal
Full-plant module thermographyDefect counts by class and location, flown inside the IEC TS 62446-3 condition window so results hold up to review
Strings and combiners not producingEnergy lost today, and often the cheapest value to recover after closing
Inverters, transformers and enclosuresExterior hot spots and cooling faults; on battery sites, enclosures running hotter than their peers under load
Visual conditionBroken glass, soiling, vegetation, erosion and drainage, racking and tracker issues, and differences from the as-built drawings
Conditions logIrradiance, temperature, wind and cloud cover by time, so the engineer can confirm the data are valid

What should land in the data room

  • A findings register keyed to the seller's asset IDs, so every finding can be matched to the monitoring system, the O&M records and the warranty paperwork
  • An estimate of energy at risk, with its assumptions stated so the independent engineer can rerun it
  • Inputs for a repair budget: counts by finding type and severity that a contractor or the engineer can price
  • The raw data: radiometric images, visual pairs and an orthomosaic, so findings can be re-checked rather than taken on trust
  • A method statement, including the inspection level, the resolution flown and any deviations or rows that couldn't be captured

When to schedule it

Early enough that findings can still be priced. Staging technical diligence lets a buyer stop spending if a plant falls outside its risk profile, and a field survey is one of the faster ways to find out. Findings that arrive in time can become a price adjustment, a seller repair obligation before closing, or a holdback, which is a conversation for your deal team and counsel.

Close enough to closing that the record is current. A survey from the seller's last O&M cycle may be a year old and scoped for maintenance, not for a buyer.

Inside the weather window. Thermography needs at least 600 W/m² on the modules, so in Southern California the practical window is clear days from spring through early fall. Build the flight date into the diligence calendar rather than fitting it in at the end.

Independence and reliance

  • The survey firm should be independent of the seller and of anyone who would be paid to do the repairs
  • Agree up front who may rely on the report: the buyer, the lenders, the independent engineer
  • Ask for the raw data, the capture date and the conditions log behind any seller-provided thermal report before relying on it

What a condition survey can't establish

  • It isn't a yield assessment or a production forecast; that stays with the independent engineer
  • It doesn't replace electrical testing such as I-V curve tracing, which confirms what a thermal pattern suggests
  • Some defects, including cell cracks and early potential-induced degradation, may show little or no thermal signature
  • On battery sites it sees the outside of enclosures and equipment, not the condition of the cells inside

Tessera's transaction condition survey is built around this scope. For what the thermography standard itself requires, see our IEC TS 62446-3 guide.

Questions

Does the independent engineer still need to visit the site?

Usually, yes. A condition survey gives the engineer full-plant data to work from; it doesn't replace their judgment or their own site review.

Can a survey cover a whole portfolio?

Yes. Each site is flown to the same method, so results are comparable across the portfolio instead of depending on which sites were sampled.

How quickly are results available?

For most engagements the report is delivered within five business days of the flight, and critical findings, such as a string not producing, are reported the same day.

Condition data on your diligence calendar

Full-plant surveys, independent of the seller and of repair vendors, with the raw data your engineer needs.

Request a proposal